Jiahao ụlọ ọrụ nwere ike na-arịọ on methodically imewe, n'ichepụta, ule na niile usoro nke mmepụta ngwaahịa na-etinye niile usoro n'okpuru àgwà akara usoro.Ụlọ ọrụ Jiahao na-agbalịsi ike ịbụ ụlọ ọrụ mba ụwa na ụlọ ọrụ extrusion.

Ngwaahịa

  • PBM NATURAL FIBER FILLING WPC BOARD PRODUCTION LINE

    PBM NATURAL FIBER FILLING WPC Board EXPRESS LINE

    PBM dabeere dị iche iche akuku straws (ihe ubi straws, sub-obere fuelwood, achara, osisi scraps, wdg) dị ka isi akụrụngwa, na n'ikpeazụ na-aghọta na mbụ nnukwu ọnụ ọgụgụ na-aga n'ihu extrusion na China naanị n'okpuru okpomọkụ na shiee ọnọdụ.

    2. Akụkụ nke ngwaahịa PBM:
    (1) E nwere ọtụtụ ụdị ahịhịa dị, nnukwu oriri na oke itinye n'ọrụ
    (2) A naghị eji gluu, ọ dịghị ihe mkpofu atọ a na-ahapụ n'oge usoro mmepụta
    (3) Enwere ike ịhazi nha nha, nke na-ebelata mfu nke ihe nhazi na-esote ma na-echekwa ụgwọ ọrụ oge mmadụ.
    (4) Ngwaahịa ahụ enweghị formaldehyde, mgbochi mmiri na ire ọkụ
    (5) Recyclable, ghọta 3R isi imegharị ihe, belata ihe mkpofu siri ike na mmepụta na ndụ, arịa ụlọ, ịchọ mma na ihe mkpofu ihe owuwu.
    (6) Ịba ụba nke osisi n'ime ọha mmadụ dum, na-enye nnukwu onyinye na nnọpụiche carbon

    mmexport1631091784888IMG_20210622_162402

  • PVC Avertising Display Foam Core Free Foam Board Line

    Ngosipụta Ngosipụta PVC Foam Core Free Foam Board Line

    PVC ngosi mpempe akwụkwọ nwetara e ji mara mgbochi corrosion, mmiri-àmà, mildew-àmà, na-abụghị absorbent, drillable, sawable, planable, mfe thermoform, na-ekpo ọkụ ekwe nhazi, wdg, n'ihi ya, ọ na ọtụtụ-eji na ngwá ụlọ, cabinets, bath. cabinets, ngosi shelf mbadamba, igbe isi n'ígwé , Ime ụlọ na n'èzí mma, ihe ụlọ, chemical ụlọ ọrụ na ndị ọzọ ubi, mgbasa ozi ihe ịrịba ama, obibi, silk ihuenyo, inkjet, kọmputa leta, electronic ngwá ngwaahịa nkwakọ na ndị ọzọ na ọrụ.

    Nkọwa ngwaahịa 1220*2440mm, 1560*3050mm, 2050*3050mm

    Ọkpụrụkpụ ngwaahịa 1-33mm

    Njupụta ngwaahịa 0.35-0.8g/cm3

    Ọsọ ahịrị mmepụta: 2-4m/min.

    moto ike 75kw -90kw

    Agba: dị iche iche

  • PVC Transparent Sheet Extrusion Line

    PVC Transparent mpempe akwụkwọ Extrusion Line

    PVC transperent mpempe akwụkwọ nwere ọtụtụ uru nke ọkụ-eguzogide, elu àgwà, ọnụ ala, elu transperent, ezi elu, ọ dịghị ntụpọ, obere mmiri ife, elu iku eguzogide, mfe ebu na wdg ọ na-emetụta dị iche iche iche iche nke mbukota, vacuuming na ikpe, dị ka ngwá ọrụ, ihe egwuregwu ụmụaka, eletriki, nri, ọgwụ na uwe

    A na-eme mpempe akwụkwọ mpempe akwụkwọ PVC site na ahịrị Extrusion anyị nke nwetara njirimara ndị ahụ

    1. Ọtụtụ ego itinye ego na akụrụngwa;

    2. Ọrụ dị mfe na ịchịkwa usoro mpempe akwụkwọ;

    3. Mfe nchekwa na ahịrị zuru oke;

    4. Ezi na kwụsie ike quaility nke mpempe akwụkwọ si akara;

  • PVC Construction Shuttering Board Line

    PVC Construction Shuttering Board Line

    Nke a akara nwere ike rụpụta PVC Board na obosara si 900 -1220mm, ọkpụrụkpụ: 12-25mm

    Nke a na-ejikarị dị ka bọọdụ mkpuchi ihe na ụlọ ọrụ ihe owuwu.

    Atụmatụ na uru nke PVC ụlọ template: 1. The akụrụngwa nke PVC ụlọ template bụ PVC SG5, osisi bụ B1 ire ere retardant, onwe-enyụọ na ikpe nke ọkụ, elu okpomọkụ iguzogide, na ewu ewu na-mma.Ụdị ụdị ọhụrụ nke na-edochi template ígwè na plywood bamboo-wood, nwere ihe ndị na-eme ka mmiri na-ekpuchi mmiri, ihe mgbochi mildew, na-eguzogide corrosion, na nke na-adịghị.2. Simenti na-adịghị mma, dị mfe ịmegharị mgbe e wuchara ya, enweghị nrụrụ.3. Ịrụ ọrụ nke ọma dị elu, àgwà dị mma, elu nke ụlọ ahụ e ji rụọ ya na-adị mma ma dị larịị, mmetụta na-akpụ akpụ na-agbapụta dị mma, ọ dịghịkwa mgbanwe nke abụọ dị mkpa.4. Oge ntụgharị ntụgharị nwere ike iru ihe karịrị ugboro 50, ogologo ndụ ọrụ, arụ ọrụ nrụpụta ka mma, nchekwa dị mma, njem na ihe owuwu.5. Enwere ike ịkụpịa template mkpofu ma megharịa ya maka mmepụta na itinye n'ọrụ na uru ndị ọzọ, na-echekwa ihe onwunwe na izute ihe ndị a chọrọ nke "ụlọ ọrụ na-acha akwụkwọ ndụ akwụkwọ ndụ".6. Mpempe ụlọ nke pVC nwere njirimara nke mkpuchi ụda, ụda ụda, mkpuchi okpomọkụ, nchekwa ọkụ, wdg, ma nwee mmetụta dị mma na-adịghị mma.7. Usoro nke ịgbakwunye osisi nwere ike iji mee ihe maka ọgwụgwọ dị iche iche, nke a na-edozi dị ka osisi dị ka ịkụ osisi, ịcha, ntu, planing, sticking, wdg. Enwere ike ijikọ ya na ihe ndị ọzọ PVC dị ka usoro izugbe si dị, ya mere ọ nwere ike ịbụ. na-agbanwe na saịtị ihe owuwu Iji mee nhazi nke abụọ.
  • PVC Free Foam Board Line

    Ahịrị bọọdụ ụfụfụ efu nke PVC

    bọọdụ ụfụfụ na-akwụghị ụgwọ nke PVC bụ ụdị bọọdụ ụfụfụ PVC.Enwere ike kewaa bọọdụ ụfụfụ PVC ka ọ bụrụ bọọdụ ụfụfụ akpụkpọ anụ PVC na bọọdụ ụfụfụ na-akwụghị ụgwọ dị ka usoro mmepụta si dị.A na-akpọ bọọdụ ụfụfụ PVC Chevron na bọọdụ Andy, na ihe mejupụtara ya bụ polyvinyl chloride.Njirimara kemịkalụ ya kwụsiri ike.Acid na alkali na-eguzogide ọgwụ!Ihe na-ekpuchi mmiri, ihe mgbochi mildew, mkpuchi ọkụ, mkpuchi ụda, ọkụ na-eme ka ọkụ na-ekpochapụ onwe ya, elu dị mma, ọkụ na-ekpo ọkụ na ọkụ, adịghị aṅụ.Isi ike elu nke bọọdụ ụfụfụ na-akwụghị ụgwọ nke PVC bụ nkezi, a na-ejikwa ya na mbadamba ihe ngosi mgbasa ozi, mbadamba ihe osise, mbipụta ihuenyo silk, ihe osise, wdg.

  • PVC RIGID CORE SHEET EXTRUSION LINE

    PVC RIGID CORE Mpempe akwụkwọ EXTRUSION ahịrị

    Model JHZ80/156 / JHZ92/188 / JHZ 110/220 Ikike 300kg / hour ka 1500kg / hour Dị ka akpụ ọnọdụ nke coextrusion ihe Dị ka a na-akpụ ala coextrusion ihe, extrusion usoro nke plastic profaịlụ nwere ike kewaa pre coextrusion. na post coextrusion.Pre coextrusion na-ezo aka na ngwakọta akpụ nke abụọ ihe na usoro nke na-ezughị ezu akpụ;Post coextrusion pụtara na otu ihe na-emepụta nke ọma wee jikọta ya na ihe ọzọ ...
  • SPC Flooring Sheet /Wall Decoration Sheet Extrusion Line

    SPC mpempe akwụkwọ mpempe akwụkwọ / ahịrị ihe ndozi mgbidi

    SPC Flooring mpempe akwụkwọ dabere na PVC isi mpempe akwụkwọ nwere ihe nkiri 2 ọzọ.a na-ejikarị ya eme ihe dị ka ihe eji eme ala maka ebe dị iche iche .

    A pụkwara iji mpempe akwụkwọ a na-eji mgbidi chọọ mma nke ga-enye ọrụ dị mma na ngosi.

    Site n'ichepụta ụkpụrụ dị iche iche, mpempe akwụkwọ a nwere ike ịka mma karịa akwụkwọ na mpempe akwụkwọ eji achọ mma n'ihi na enwere otu oyi akwa ọzọ maka mgbochi scracth.

    Ọ bụ ogologo ihe ikpeazụ maka mgbidi mgbidi na ọ bụ naanị emebere ya maka ngwa a, ọ ga-ewu ewu n'oge na-adịghị anya.

    Ozi igwe:

    Mpempe akwụkwọ obosara: 970-1350mm, ọkpụrụkpụ: 2-8mm

    Ike: 1200kg / hour

    Ogologo igwe: 35meters

    Ụdị extruder: ejima conical

    Ike moto: 200kw

     

  • PVC WPC Bathroom Furniture Board Line

    PVC WPC Bathroom Furniture Board Line

    Osisi ụfụfụ PVC / WPC ugbu a na-aghọ otu ụdị ihe mara mma nke a na-ejikarị na ngwa osisi.Site na ịrụ ọrụ dị mma na uru, ọ na-adọrọ mmasị, ejiji, ihe na-adịgide adịgide na nke mara mma maka ịchọ mma ụlọ.The mmepụta akara na-emi esịnede pụrụ iche ejima-ịghasa extruder, extrusion anwụ, vetikal atọ rola na inyeaka igwe.Ụlọ ọrụ anyị na-enye usoro na teknụzụ zuru oke.The dum mmepụta akara nwere àgwà nke nnukwu mmepụta, anụ extrusio ...
  • SPC Flooring Sheet Extrusion Line

    Line Extrusion mpempe akwụkwọ SPC

    Ala mgbachi SPC bụ oyi akwa na-eguzogide oyi, oyi akwa UV, oyi akwa udidi ihe nkiri agba, na oyi akwa ihe ndabere.Mba Europe na America na-akpọ ụdị ala a RVP (isi ike vinyl plank), ala rọba siri ike.Ihe mgbakwasị ụkwụ bụ mbadamba ihe mejupụtara nke nkume ntụ ntụ na ihe polymerplastic thermoplastic mgbe a kpalitere nke ọma wee wepụ ya na elu okpomọkụ.N'otu oge ahụ, ọ nwere njirimara na njirimara nke osisi na plastik iji hụ na ike ...
  • PVC DECORATIVE SHEET EXTRUSION  LINE

    Ahịrị EXTRUSION IHE MMADỤ PVC ịchọ mma

    PVT Marble Sheet Line bụ efere ọhụrụ a na-achọ mma gburugburu ebe obibi, mkpuchi elu ya na ihe nkiri PVC mgbe ọgwụgwọ UV gasịrị, a na-eme ka ike ya dịkwuo mma, karịa gburugburu ebe obibi, enweghị mmiri, ọkụ na-eguzogide, na-eguzogide ọgwụ, na-adị ire ụtọ ma dị ọcha nke ọma n'elu ala, nguzogide corrosion. .Ọtụtụ ụdị ụdị PVC maka nhọrọ, nke a na-eme ka nhọrọ ahụ dịkwuo mma, ahịa na-anabata ma mara ya.

  • WPC Cabinet Furniture Board Line

    WPC Cabinet Furniture Board Line

    Osisi-plastic osisi bụ ụdị osisi (osisi cellulose, osisi cellulose) dị ka isi ihe, thermoplastic polymer ihe (plastic) na nhazi ihe enyemaka, wdg, agwakọta uniformly, na mgbe ahụ kpụ ọkụ n'ọnụ na extruded site ebu ngwá.Ihe eji achọ mma dị elu, akwụkwọ ndụ akwụkwọ ndụ na gburugburu ebe obibi, nke nwere ma arụmọrụ na njirimara osisi na plastik, bụ ihe ọhụrụ mejupụtara nke nwere ike dochie osisi na plastik.1. Waterproof: mothpr...
  • LVT Flooring Production Line (Online Lamination)

    Ahịrị nrụpụta ala LVT (Lamination Online)

    Ala LVT ọdịnala nwere usoro mmepụta dị mgbagwoju anya, oriri ike dị elu, ogologo oge ọrụ, ọ dịghịkwa mma maka nchebe gburugburu ebe obibi.

    Ụlọ ọrụ anyị emepụtala ọhụrụ elu-arụmọrụ extrusion akara dabeere ọhụrụ vinyl n'ala extrusion technology, nke nwere ike na-aghọta extrusion nke isi oyi akwa na online laminated na agba film na-eyi oyi akwa, niile na-esichara n'otu oge.LVT anyịLine Production Linenwere mmepụta dị elu, usoro nrụpụta dị mfe na akpaaka dị elu.

    Ogologo ogologo: 1-2.5mm
    Obosara nso (tupu mwepu): 600-1300mm
    Ike mmepụta: 400kg / h, 700kg / h, 1500kg / h

12Ọzọ >>> Peeji nke 1/2